sadsad x
asdasd
New
Hover over the picture to zoom

Arduino GIGA R1 WiFi

Product Code: MP02633
Supplier Code: ABX00063
(0 Comment)
2,818.67 TL + VAT
Price Including VAT
3,382.40 TL
Stock Quantity : 7
Bu Ürüne Özel Kampanyalar
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
  • Features
  • Payment Options
  • Comments (0)
  • Arduino GIGA R1 WiFi

    The Arduino GIGA R1 WiFi is designed for ambitious makers who want to step up their game. It levels the playing field for gamers, artists, sound designers and anyone coming to the tech world with big ideas on a budget – because it packs advanced features into an accessible component, with the same form factor as our popular Mega and Due.

    Let’s break down all the powerful features of this board.

    Microcontroller (STM32H747XI): This dual core 32-bits microcontroller allows you have two brain talking to each other (a Cortex®-M7 at 480 MHz and a Cortex®-M4 at 240 MHz) you can even run micropython in one and Arduino in the other.

    Wireless communication (Murata 1DX):  Whether you prefer Wi-Fi® or Bluetooth®, the GIGA R1 WiFi got you covered. You can even quickly connect to the Arduino IoT Cloud and keep track of your project remotely. And if you are concerned about the security of the communication, the ATECC608A keeps everything under control.

    Hardware ports and communication: Following the legacy of the Arduino Mega and the Arduino Due, the GIGA R1 WiFi has 4 UARTs (hardware serial ports), 3 I2C ports (1 more than its predecessors), 2 SPI ports (1 more than its predecessors), 1 FDCAN.

    GPIOs and extra pins: We wanted to keep the same form factor of the Mega and the Due, so you can easily adapt your custom made shields to the GIGA R1 WiFi (remember this board works at 3.3V though!) and we added extra headers to access extra pins, leaving the total count to 76 GPIO pins, and the best part, you can access them from underneath, so keep your project as it is and just think on how to expand it. Also, we added two new pins: a VRTC so you can connect a battery to keep the RTC running while the board is off and an OFF pin so you can shut down the board.

    Connectors: The GIGA R1 WiFi has extra connectors on board which will facilitate the creation of your project without any extra hardware. This board has:

    USB-A connector suitable for hosting USB sticks, other mass storage devices and HID devices such as keyboard or mouse.

    3.5mm input-output jack connected to DAC0, DAC1 and A7.

    USB-C® to power and program the board, as well as simulate an HID device such as mouse or keyboard.

    Jtag connector, 2x5 1.27mm.

    20 pin Arducam camera connector.

    Higher voltage support: In comparison with its predecessors that support up to 12 volts, the GIGA R1 WiFi can handle a range of 6 to 24 volts.

    Tech specs

    Board

    Name

    Arduino® GIGA R1 WiFi

    SKU

    ABX00063

    Microcontroller

    STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU (datasheet)

    Radio Module

    Murata 1DX dual WiFi 802.11b/g/n 65 Mbps and Bluetooth® (datasheet)

    Secure Element

    ATECC608A-MAHDA-T (datasheet)

    USB

    USB-C®

    Programming Port / HID

    USB-A

    Host (enable with PA_15)

    Pins

    Digital I/O Pins

    76

    Analog input pins

    12

    DAC

    2 (DAC0/DAC1)

    PWM pins

    12

    Misc

    VRT & OFF pin

    Communication

    UART

    Yes, 4x

    I2C

    Yes, 3x

    SPI

    Yes, 2x

    CAN

    Yes (Requires an external transceiver)

    Connectors

    Camera

    I2C + D54-D67

    Display

    D1N, D0N, D1P, D0P, CKN, CKP + D68-D75

    Audio Jack

    DAC0, DAC1, A7

    Power

    Circuit operating voltage

    3.3V

    Input voltage (VIN)

    6-24V

    DC Current per I/O Pin

    8 mA

    Clock Speed

    Cortex® M7

    480 MHz

    Cortex® M4

    240 MHz

    Memory

    STM32H747XI

    2MB Flash, 1MB RAM

    Dimensions

    Width

    53 mm

    Length

    101 mm

    Documentation

    Schematics

    Datasheet

    Learn More

    Pinout Diagram
    ABX00063-pinout.png (376 KB)

Prepared by  T-Soft E-Commerce.