SIM7600G-H 4G DTU

• The "SIM7600G-H 4G DTU" is an industrial-grade communication module.
• It is based on the SIM7600G-H communication module.
• The module comes with multiple protection circuits.
• It is specifically designed for industrial applications.
• It supports a wide power supply range of 7 to 36 volts.
• The module includes a built-in STM8 MCU (Microcontroller Unit).
• Communication interfaces supported include UART, RS232, RS485.
• It is compatible with 4G networks.

Package Contents

• 1x SIM7600G-H 4G DTU Main Unit
• 1x High Gain LTE MAIN Antenna (~3m)
• 1x High Gain LTE AUX Antenna
• 1x GPS Antenna
• 1x Serial Cable (male to female, ~1.5m)
• 1x USB-A to micro-B Cable (~1.2m)

Specifications

• Operating Voltage: 7 ~ 36 V DC
• Operating Current: Idle: 10 ~ 30 mA at 12 V | Transmission: 80 ~ 450 mA at 12 V (depending on network status)
• Serial Port Baud Rate: 300 bps ~ 4 Mbps (default: 115200 bps)
• Indicators: PWR (power supply), RXD/TXD (UART RX/TX), NET (network), LINK (user-defined)
• Button: Reset button
• SIM Card: Standard SIM card (1.8V / 3V)
• Antenna Connectors: MAIN LTE, AUX LTE, GNSS
• Operating Temperature: -40 ~ 80 °C
• Weight: 0.538 kg
• For more information click here..

Frequency Bands

• 4G: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 LTE-TDD: B34, B38, B39, B40, B41
• 3G: UMTS / HSDPA / HSPA+ | B1, B2, B4, B5, B6, B8, B19
• 2G: GSM / GPRS / KENAR | 850, 900, 1800, 1900MHz
• GNSS: GPS, Beidou, GLONASS, GALILEO, QZSS
• Applicable Regions: Küresel destek

Data Rates

• 4G (LTE Cat-4): 150 Mb/sn (DL) / 50 Mb/sn (UL)
• 3G (HSPA+): 42 Mb/sn (DL) / 5,76 Mb/sn (UL)
• 2G (EDGE): 236,8 Kbps (DL) / 236,8 Kbps (UL)
• 2G (GPRS): 85,6 Kbps (DL) / 85,6 Kbps (UL)

Software

• Communication Protocols: TCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS
• Operating System Support: Windows / Linux, etc.

Hardware

• Serial Port: RS232 | RS485 | TTL (UART)
• Power Input: Connector: 7 ~ 36 V screw terminals or DC 12V jack | Protection: Schottky diode protection, reverse protection
• Hardware Protection: Embedded MCU, hardware watchdog to prevent system crashes, industrial-grade aluminum alloy casing
• USB Port: Operating Voltage: 5 V | Connector: Micro USB | Protection: ESD protection diode | Usage: Parameter configuration, dial-up connection, firmware upgrade

Multiple Antennas

• High Gain LTE MAIN Antenna: Magnetic Base, Waterproof, Suitable for Outdoor Use with Extension Cable
• High Gain LTE AUX Antenna: Enhances Signal Strength, Accelerates Data Speed
• GPS Antenna: 28±2dB Gain, IP65~IP67 Waterproof

What's on the Board ?

Indicators and Buttons

Monitoring Real-Time Connection and Signal Status

1. PWR (Power): This LED appears red when the power is turned on.

2. TXD (Transmit Data): It blinks in blue while data is being transmitted.

3. RXD (Receive Data): This LED blinks in blue while data is being received.

4. NET (Network): It blinks in green when a network connection is established.

5. LINK (User-Defined): This LED serves as a user-defined indicator.

6. RESET: This is the reset button for the device.