This CP2102 USB Board is a handy UART accessory for communicating with devices, that features the single-chip USB to UART bridge CP2102 onboard.
This version of the module includes a USB-C connection and comes with pin headers and jumper wires. We also stock a Micro-USB version.
Note: the module is compatible with TTL level only, to avoid damage please do not directly connect to an RS232 circuit.
Features
- Single-Chip USB to UART Data Transfer
- * No external resistors required, no external crystal required
- * On-chip power-on reset circuit and voltage regulator
- * Integrated 1024-Byte EEPROM
- USB Function Controller
- * USB Specification 2.0 compliant; full-speed (12 Mbps)
- * USB suspend states supported via SUSPEND pins
- UART
- * All handshaking and modem interface signals
- * Data formats supported:
- * Data bits: 5, 6, 7, and 8
- * Stop bits: 1, 1.5, and 2
- * Parity: odd, even, no parity
- * Baud rates: 300 bps to 1 Mbits
- * 576 Byte receive buffer; 640 byte transmit buffer
- * Hardware or X-On/X-Off handshaking supported
- * Event character support
- Virtual COM Port Device Drivers
- * Windows 8/7/Vista/Server 2003/XP/2000
- * MAC OS-X/OS-9
- * Linux 2.40 or higher
- USBXpress Direct Driver Support
- * Windows 7/Vista/Server 2003/XP/2000
- * Windows CE
- Temperature Range
- * –40 to +85 °C
Package Contents
- 1x CP2102 USB UART Board (USB-C)
- 2x 4-pin male pin header
- 2x 4-pin female pin header
- 1x 6-pin custom connector jumper wire
Specifications
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Pins accessible on pin headers: TXD, RXD, RTS, CTS
- Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
Dimensions
EN − TL
