Industrial RS232/RS485 to Ethernet Converter for AB

Industrial RS232/RS485 to Ethernet Converter for AB

RS232/485 TO ETH" is an industrial-grade RS232/RS485 to Ethernet converter that allows bidirectional transparent data transmission between RS232/RS485 and RJ45 Ethernet interfaces. This converter can be configured through a web page, even while in operation.

• Manufacturer's Page
• Product Resources

Key Features

• • Utilizes a high-speed, stable, and reliable 32-bit ARM processor from the M4 series with a frequency of up to 120 MHz.
  • Equipped with a 10/100M automatic MDI/MDIX Ethernet interface, making it compatible with both crossover and straight-through Ethernet cables.
  • Features both RS232 and RS485 interfaces, allowing them to operate independently without interference.
  • Supports configurable baud rates (from 600 bps to 230.4 Kbps) and five parity control options: None, Odd, Even, Mark, Space.
  • Provides multiple indicators to monitor communication and operating status.
  • Offers various working modes, including TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supporting GET and POST methods).
  • Supports the Modbus protocol, making it suitable for industrial applications.
  • Provides WebSocket support, allowing bidirectional transparent data transmission via a web page and the RS232/RS485 port.
  • Configurable via a web page, AT commands, serial protocols, and network protocols, providing a configuration protocol that can be integrated into your own software.
  • Supports custom heartbeat packets to ensure connection integrity and actively receive sensor data.
  • Supports custom registration packets, automatically transmitting the registered packet identifier after establishing a connection, enabling differentiation between different devices.
  • Allows customization of the web page, enabling users to customize the module's configuration page.
  • Supports a protocol similar to RFC2217, facilitating communication with devices that may change serial settings (such as baud rate and data bits).
  • Implements a KeepAlive mechanism to detect disconnected connections and support automatic reconnection.
  • Supports timeout-triggered restarts (restarts without data) for long-term stable connections, with a configurable restart time.
  • Supports DNS name resolution and configurable DNS servers.
  • Supports DHCP for automatic IP assignment or static IP configuration.
  • Firmware can be upgraded over the network.
  • Provides factory settings restoration via software and/or hardware.
  • Comes with a customizable default MAC address.
  • Includes provided software: module configuration software, TCP/UDP test tool, VCOM virtual serial port software.
  • Supports sample code for various programming languages, including host (socket), VB, C++, Delphi, Android, iOS, etc.

• Ethernet:
  • Connector: 4-pin RJ45
  • Communication Speed: 10/100 Mbps
  • Interface Protection: 2KV electromagnetic isolation
  • Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client, WebSocket
  • TX Buffer: 16K bytes
  • RX Buffer: 16K bytes
• RS485/RS232:
  • Connector:
    • RS485: Screw terminals (A+, B-, GND)
    • RS232: DB9 male
  • Data Bits: 5-bit, 6-bit, 7-bit, 8-bit
  • Stop Bits: 1, 2
  • Parity: None, Odd, Even, Mark, Space
  • Baud Rate: 600 bps to 230.4 Kbps
  • TX Buffer: 2K bytes
  • RX Buffer: 2K bytes
  • Hardware Flow Control: RTS/CTS
  • Interface Protection:
    • RS485: 2KV ESD protection, lightning-proof, anti-surge, overcurrent protection
    • RS485 pull-up/pull-down resistors: 2.2KΩ

• Power:

  • Power Supply: 5.0~36.0V (5V recommended)
  • Operating Current: 86.5mA (@5V)
  • Power Consumption: <1W
  • Interface Protection: reverse polarity, ESD protection, anti-surge

• Environment:

  • Operating Temperature: -40~85°C
  • Storage Temperature: -40~105°C

Dimensions

This Industrial RS232/RS485 to Ethernet Converter is competitively priced and available for purchase from SAMM Market with same-day shipping and fast delivery options for customers in the EU.