Forgot password?

Raspberry Pi Camera 3 NoIR

Product Code : MP02151
Supplier Code: SC0873
1,000.13 TL + VAT
1,000.13 TL + VAT
1,200.15 TL
%0 Discount
EFT / Money Order Price : 1,164.15 TL %3  Discount

Out Of Stock

Notify me when its in stock
Add to List Comment Price Alert

The Raspberry Pi Camera Module 3 NoIR is the latest entry in the Official Raspberry Pi range of camera modules, offering a new 12 Megapixel Sony IMX708 image sensor, powered autofocus, improved low-light sensitivity and HDR (High Dynamic Range) support!

This NoIR version is infrared-sensitive with no InfraRed (NoIR) filter on the lens, which makes it perfect for shooting Infrared photography and taking pictures/video in low light (twilight) environments. For night photography, you'll need to flood the target with infrared light.

The new Camera Module 3 is available with a standard 75° or wide-angle 120° lens (select version before adding to cart), giving you more options for your specific project needs. We also have a standard version which is better suited for daylight photography.

The module is capable of 4608x2592 pixel images and 4608x2592 @14 FPS/2304x1296 @56 FPS/1536x864 @120FPS video. When HDR is enabled, the resolution is limited to 2304x1296 @ 30 FPS.

Compatibility (Important!)


The Camera Module 3 is mechanically identical to the previous Camera Module V2 apart from the front sensor section. The new sensor is larger and may not fit all previous camera accessories

We are in the process of updating each camera accessory in the store to indicate compatibility within the product descriptions


The Camera Module 3 can only be used with libcamera - the previous raspistill/raspivid libraries will not work

You will need to update Raspberry Pi OS as the Camera Module 3 requires a new driver and a specific version of libcamera


The Camera Module 3 is compatible with all Raspberry Pi boards with a camera connector (CSI connector)

To use this camera with a Raspberry Pi Zero (which has a smaller connector), you will need to use an adapter cable


  •  * Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  •  * High signal-to-noise ratio (SNR)
  •  * Built-in 2D Dynamic Defect Pixel Correction (DPC)
  •  * Phase Detection Autofocus (PDAF) for rapid autofocus
  •  * QBC Re-mosaic function
  •  * HDR mode (up to 3-megapixel output)
  •  * CSI-2 serial data output
  •  * 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  •  * 2-wire serial control of focus mechanism
  •  * Sensor: Sony IMX708
  •  * Resolution: 11.9 megapixels
  •  * Sensor size: 7.4mm sensor diagonal
  •  * Pixel size: 1.4μm × 1.4μm
  •  * Horizontal/vertical: 4608 × 2592 pixels
  •  * Common video modes: 1080p50, 720p100, 480p120
  •  * Output: RAW10
  •  * IR cut filter: Not present (NoIR)
  •  * Autofocus system: Phase Detection Autofocus
  •  * Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
  •  * Ribbon cable length: 150mm
  •  * Cable connector: 15 × 1mm FPC
  •  * Compliance:
  •  * FCC 47 CFR Part 15, Subpart B, Class B Digital Device
  •  * Electromagnetic Compatibility Directive (EMC) 2014/30/EU
  •  * Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
  •  * Production lifetime: Raspberry Pi Camera Module 3 will remain in production until at least January 2030

Lens Specifications


  •  * Effective focal length 4.74mm
  •  * f/1.8
  •  * Diagonal field of view 75 degrees (at 16:9)
  •  * 35mm equivalent focal length roughly 28mm (full width) - 30mm (3:2 crop)
  •  * Focus 10cm - infinity


  •  * Effective focal length 2.75mm
  •  * f/2.2
  •  * Diagonal field of view 120 degrees (at 16:9)
  •  * 35mm equivalent focal length roughly 16mm (full width) - 18mm (3:2 crop)
  •  * Focus 5cm - infinity

Package Contents

1x Raspberry Pi Camera Module 3 NoIR (Standard or wide - please select the required version before adding to cart)

1x 150mm camera ribbon cable (fitted to the camera module)


Prepared by  T-Soft E-Commerce.