Binocular Camera Base For CM4

DUAL CAMERA BASE FEATURES

  * CM4 socket: suitable for all variants of Compute Module 4

  * Network Gigabit: Ethernet RJ45

  * USB: USB 2.0 × 1

  * FFC connector: HDMI & PCIe & USB FFC connector × 1 - GPIO FFC connector × 1

  * Dual camera

  * - 8MP pixels

  * - Sensor IMX219

  * - Resolution 3280 × 2464 (per channel)

  * - CMOS size 1/4 inch

  * - Aperture F2.4

  * - Focal length 2.6mm

  * - FOV 83/73/50 degrees (cross/horizontal/vertical)

  * - Distortion < 1%

  * - Base length 60 mm

  *  Video: HDMI × 1 supports 4K 30fps output

  * Storage: Storage MicroSD card socket for Compute Module 4 Lite (without eMMC) variants

  * Power input: 5V/2.5A

  * Dimensions: 85.0 × 51.5 mm

  * Click for product resources.

Introducing the Optional Interface Extender

Providing Interfaces Including GPIO, HDMI, USB, M.2 M KEY

INTERFACE EXPANSION FEATURES

  * USB USB 2.0 × 3

  * FFC connector HDMI & PCIe & USB FFC connector × 1

  * GPIO FFC connector × 1

  * Other connector M.2 M KEY × 1 to connect NVME SSD or communication module

  * Raspberry Pi 40PIN GPIO header × 1

  * Video HDMI × 1 supports 4K 30fps output

  * Dimensions 85.0 × 51.5 mm

What's On The Board?

1 - CM4 socket - suitable for all variants of Compute Module 4

2 - HDMI connector - Supports 4K 30fps output

3 - USB 2.0 port - for connecting USB devices

4 - Power and USB - USB-C connector, 5V DC power supply or USB programming port

5 - BOOT selection

ON: CM4 boots from USB-C interface

OFF: Boots from CM4, eMMC or Micro SD card

6 - CM4 status indicator

PWR: Raspberry Pi power indicator

ACT: Raspberry Pi working status indicator

7 - RJ45 Gigabit Ethernet - 10/100/1000M compatible

8 - Micro SD card slot - To connect a Micro SD card with pre-burned image (Lite variant ONLY)

9 - GPIO FFC connector - 40PIN to expand GPIO

10 - HDMI & PCIe & USB FFC connector - HDMI1, PCIe, for extending USB

11 - Dual camera - IMX219, 8MP

Click for the product manufacturer page.