sadsad x
asdasd
Hover over the picture to zoom
  • Features

    Arduino Nano 33 IoT (Headers) (Original)

    The Arduino Nano 33 IoT is the easiest and cheapest point of entry to enhance existing devices (and creating new ones) to be part of the IoT and designing pico-network applications. Whether you are looking at building a sensor network connected to your office or home router, or if you want to create a BLE device sending data to a cellphone, the Nano 33 IoT is your one-stop-solution for many of the basic IoT application scenarios.

    The board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21. The WiFi and Bluetooth® connectivity is performed with a module from u-blox, the NINA-W10, a low power chipset operating in the 2.4GHz range. On top of those, secure communication is ensured through the Microchip® ECC608 crypto chip. Besides that, you can find a 6 axis IMU, what makes this board perfect for simple vibration alarm systems, pedometers, relative positioning of robots, etc.

    WiFi and Arduino IoT Cloud

    At Arduino we have made connecting to a WiFi network as easy as getting an LED to blink. You can get your board to connect to any kind of existing WiFi network, or use it to create your own Arduino Access Point. The specific set of examples we provide for the Nano 33 IoT can be consulted at the WiFiNINA library reference page.

    It is also possible to connect your board to different Cloud services, Arduino's own among others. Here some examples on how to get the Arduino boards to connect to:

    • Arduino's own IoT Cloud: Arduino's IoT Cloud is a simple and fast way to ensure secure communication for all of your connected Things. Check it out here
    • Blynk: a simple project from our community connecting to Blynk to operate your board from a phone with little code
    • IFTTT: see an in-depth case of building a smart plug connected to IFTTT
    • AWS IoT Core: we made this example on how to connect to Amazon Web Services
    • Azure: visit this github repository explaining how to connect a temperature sensor to Azure's Cloud
    • Firebase: you want to connect to Google's Firebase, this Arduino library will show you how

    Note: while most of the above-shown examples are running on the MKR WiFi 1010, both boards have the same processor and wireless chipset, which means it will be possible to replicate them with the Nano 33 IoT.

    Bluetooth® and BLE

    The communications chipset on the Nano 33 IoT can be both a BLE and Bluetooth® client and host device. Something pretty unique in the world of microcontroller platforms. If you want to see how easy it is to create a Bluetooth® central or a peripheral device, explore the examples at our ArduinoBLE library.

    Getting Started

    The Getting Started section contains all the information you need to configure your board, use the Arduino Software (IDE), and start tinkering with coding and electronics.

    Technicial Specifications

    The Arduino Nano 33 IoT is based on the SAMD21 microcontroller.

    MICROCONTROLLER

    SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)

    RADIO MODULE

    u-blox NINA-W102 (datasheet)

    SECURE ELEMENT

    ATECC608A (datasheet)

    OPERATING VOLTAGE

    3.3V

    INPUT VOLTAGE (LIMIT)

    21V

    DC CURRENT PER I/O PIN

    7 mA

    CLOCK SPEED

    48MHz

    CPU FLASH MEMORY

    256KB

    SRAM

    32KB

    EEPROM

    none

    DIGITAL INPUT / OUTPUT PINS

    14

    PWM PINS

    11 (2, 3, 5, 6, 9, 10, 11, 12, 16 / A2, 17 / A3, 19 / A5)

    UART

    1

    SPI

    1

    I2C

    1

    ANALOG INPUT PINS

    8 (ADC 8/10/12 bit)

    ANALOG OUTPUT PINS

    1 (DAC 10 bit)

    EXTERNAL INTERRUPTS

    All digital pins (all analog pins can also be used as interrput pins, but will have duplicated interrupt numbers)

    LED_BUILTIN

    13

    USB

    Native in the SAMD21 Processor

    IMU

    LSM6DS3 (datasheet)

    LENGTH

    45 mm

    WIDTH

    18 mm

    WEIGHT

    5 gr (with headers)

    Documents

    Programming and Debugging Port

    On the bottom side of the board, under the communication module, debug signals are arranged as 3x2 test pads with 100 mil pitch. Pin 1 is the bottom left one with the USB connector on the left and the test pads on the right. Check the downloadable pinout diagram for the exact configuration.

    Availability of the Nina Module Pins

    Some of the NINA W102 pins are connected to the 15+15 pins headers/pads and can be directly driven by the module's ESP32; in this case it is necessary that the SAMD21 corresponding pins are aptly tri-stated. Below is a list of such signals:

    SAMD21 Pin

    SAMD21 Acronym

    NINA Pin

    NINA Acronym

    Header Description

    48

    PB03

    8

    GPIO21

    A7

    14

    PA09

    5

    GPIO32

    A6

    8

    PB09

    31

    GPIO33

    A5 / SCL

    7

    PB08

    35

    GPIO5 / GPIO19

    A4 / SDA

    Competitive and Affordable Arduino Nano 33 IoT (Headers) (Original) on SAMM Market.

    You can order Arduino Nano 33 IoT (Headers) (Original) from SAMM Market with the advantage of affordable price, same day shipping and fast delivery from Arduino Models category.

  • Payment Options

Arduino Nano 33 IoT (Headers) (Original)

Arduino

Product Code:

MP01785

Supplier Code: ABX00032
(0 Comment)
Comment >
238.56 TL + VAT
Price Including VAT
281.50 TL
Stock : In stock
Bu Ürüne Özel Kampanyalar
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
Prepared by  T-Soft E-Commerce.