sadsad x
asdasd
Hover over the picture to zoom
  • Features

    Arduino MKR FOX 1200 w/o Antenna (Original)

    The Arduino MKR FOX 1200 board provides a practical and cost effective solution to adding Sigfox connectivity to projects requiring low power. This open source board can be connected to Arduino Create for programming, and to the existing Sigfox infrastructure with it’s broad Europe-wide coverage for collecting data. Sigfox infrastructure runs 24/7 without you needing to do anything to maintain it, and you can always check its status here.

    The MKR FOX 1200, gives you a great out-of-the-box experience when building IoT projects of any size: from the single sensor monitoring temperature in your home, to an industrial deployment covering the whole of an outdoors factory. The board's main processor is a low power Arm® Cortex®-M0 32-bit SAMD21, like in the other boards within the Arduino MKR family. The Sigfox connectivity is performed with a module from Microchip®, the Smart RF ATA8520, a low power chipset operating in the 868 MHz range. No extra crypto chip is needed in this case, since the Sigfox network offers its own end-to-end security.

    These features make it a great IoT node and building block for low power wide area IoT devices within the Sigfox infrastructure.

    Sigfox Connectivity

    At Arduino we have made partnered with Sigfox to offer you straightforward way to connect devices to the Cloud with zero investment in infrastructure. Every MKR FOX 1200 comes with a free one-year subscription to Sigfox' data plan, useful for testing the Sigfox network. Please check the plan’s conditions in terms of messages per day at the Sigfox website.

    When it comes to coverage, Sigfox covers a large percentage of the European soil. Check this page at Sigfox website to see whether your planned area of application is covered.

    Sigfox Starter Program

    sigfox-build.png (106 KB)

    To ensure a better experience for you, our MKR FOX 1200 user eager to start a new project, Sigfox offers a special program called the Sigfox Starter Program. Among others it will give you:

    • Access to Sigfox technical platforms (backend, build, etc.)
    • Access to Sigfox APIs to start playing with real Sigfox data.
    • Access to specialized Sigfox technical content support, the so-called learning center.

    Once you have got your board, apply to the program here.

    Battery Power

    Its USB port can be used to supply power (5V) to the board. It has a screw connector where to attach a 3V battery pack. The board consumes so little that it runs on two 1,5V batteries type AA or AAA for a really long time.

    Getting Started

    The Getting Started section contains all the information you need to configure your board, use the Arduino Software (IDE), and start tinkering with coding and electronics. If you want to know more about Arduino’s Sigfox API, check this reference page.

    Technicial Specifications 

    The Arduino MKR FOX 1200 is based on the SAMD21 microcontroller.

    MICROCONTROLLER

    SAMD21 Cortex®-M0+ 32bit low power ARM MCU (datasheet)

    RADIO MODULE

    Microchip® Smart RF ATA8520 (datasheet)

    BOARD POWER SUPPLY (USB/VIN)

    5V

    SUPPORTED BATTERIES

    2x AA or AAA

    CIRCUIT OPERATING VOLTAGE

    3.3V

    DIGITAL I/O PINS

    8

    PWM PINS

    13 (0 .. 8, 10, 12, 18 / A3, 19 / A4)

    UART

    1

    SPI

    1

    I2C

    1

    ANALOG INPUT PINS

    7 (ADC 8/10/12 bit)

    ANALOG OUTPUT PINS

    1 (DAC 10 bit)

    EXTERNAL INTERRUPTS

    8 (0, 1, 4, 5, 6, 7, 8, 16 / A1, 17 / A2)

    DC CURRENT PER I/O PIN

    7 mA

    CPU FLASH MEMORY

    256 KB (internal)

    SRAM

    32 KB

    EEPROM

    no

    CLOCK SPEED

    32.768 kHz (RTC), 48 MHz

    LED_BUILTIN

    6

    FULL-SPEED USB DEVICE AND EMBEDDED HOST

     

    LED_BUILTIN

    6

    ANTENNA GAIN

    2dB (bundled antenna at the Arduino Store)

    CARRIER FREQUENCY

    868 MHz

    WORKING REGION

    EU

    LENGTH

    67.64 mm

    WIDTH

    25 mm

    WEIGHT

    32 gr.


    Documents

    Competitive and Affordable Arduino MKR FOX 1200 w/o Antenna (Original) is in SAMM Market.

    You can order Arduino MKR FOX 1200 w/o Antenna (Original) from SAMM Market with the advantage of affordable price, same day shipping and fast delivery from Arduino Models category.

  • Payment Options

Arduino MKR FOX 1200 w/o Antenna (Original)

Arduino

Product Code:

MP01781

Supplier Code: MKRFOX1200WANT
(0 Comment)
Comment >
688.98 TL + VAT
Price Including VAT
812.99 TL
Stock : In stock
Bu Ürüne Özel Kampanyalar
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
Prepared by  T-Soft E-Commerce.