Adafruit NeoPixel UV LED Strip 32 LED/White PCB - 1M

Adafruit NeoPixel UV LED Strip 32 LED/White PCB - 1M

A meter-long Adafruit NeoPixel UV strip with 32 LEDs! Each order comes with a strip that's one meter in length.

The strip is made of flexible PCB material and comes with a weather-resistant casing. You can easily cut this material with wire cutters. There are cut lines every 3 cm (each containing 1 LED). Solder to the 0.1" copper pads, and you're ready to go.

To power these strips, you should use a 5V DC power supply. Do not exceed 6V, or you'll damage the entire strip.

Each end comes with a 2-pin JST SM connector.

You can use these with any 'NeoPixel' or WS2812 driver (such as FastLED, etc.). The R, G, and B channels are converted into three separate UV diodes. So, we recommend setting all three channels to the same value between (0, 0, 0) and (255, 255, 255) to change the brightness of the three UV LEDs inside each 5mm x 5mm package.

Documentation

• UV LED Datasheet

You can purchase the competitive and reasonably priced Adafruit NeoPixel UV LED Strip 32 LED/White PCB - 1M from SAMM Market with the advantage of same-day shipping and fast delivery.