NAS Mini-Computer For CM4

The CM4-NAS-Double-Deck is an all-in-one mini PC primarily to use for home environments or small home offices, but not limited to these scenarios. Out of the box, no expert knowledge of networking and storage systems is required.

Features at a Glance

All-in-one Mini Computer mainly designed for home or small home office but not limited to above applications

Out of the box, no expert knowledge of networking and storage systems required

Central 2x SATA slots for attaching 2.5 inch Solid State Drives

2 inch SPI LCD screen to monitor the uptime of CM4 in real time: CPU, RAM, system disk usage, network speed and temperature, etc.

Easy to use, convenient for online access to documents, videos and music anytime

Features

CPU * Broadcom BCM2711 Quad Core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

Memory * 4GB

EMMC FLASH * 8GB

CONNECTION

Dual band (2.4 GHz/5.0 GHz) IEEE 802.11b/g/n/ac wireless WiFi, Bluetooth 5.0, BLE with phantom and external antenna options *

Gigabit Ethernet RJ45 connection

2 x USB 2.0 ports

2 x SATA slots (2.5 inch SATA)

TF card slot for estimating Compute Module 4 Lite (without eMMC)

HDMI × 1, 4K 30fps output realized

WORKING VOLTAGE 5V DC
Click here for the manufacturer's page.

Notes

Charge Do not unplug any device other than USB.

The Type C port can be used as a power supply for programming drawing or as a USB SLAVE narration.

In order to ensure the normal power supply of CM4, please do not connect other devices that use Type-C interface to program the computer.

When the CM4 is in normal use, the CM4 needs to run a 5V 2A or higher power supply. Otherwise, problems such as automatic detection and frequency reduction may occur.

The module has no protection, please do not short-circuit the power supply.

USB2.0 is off by default, if you want to open it, you need to edit dtoverlay=dwc2,dr_mode=host to run config.txt.

Installation Guide

NAS Usage and Installation Guide