The USB-CAN-B is an industrial-grade, high-performance USB to CAN adapter with a CAN-bus communication interface card and CAN protocol data analysis capabilities. It features dual independent channels integrated with electrical isolation and multiple protection circuits. It supports Windows and Linux systems, and comes with drivers, software related to CANTools, secondary development examples, and training materials. It can be connected to a PC or industrial control host via a USB port for receiver-transmitter control, data analysis, and collecting and monitoring CAN data bus network. It is compact and easy to use, suitable for secondary development and integration in various industrial, power communication, and smart control applications that require CAN data bus communication, learning and debugging CAN data bus, and fault diagnosis.
Features
- Product Type: Industrial-grade USB to CAN Interface Converter / CAN-bus Communication Interface Card / CAN Protocol Data Analyzer
- USB Operating Voltage: 5V (Powered directly from USB port without external power supply)
- Connector: USB-B
- Protection: Power and signal full isolation, 2500V DC isolation, ±8KV electrostatic discharge
- CAN Interface: Dual channel: CAN1 and CAN2 (independent and isolated)
- Connector: CAN data bus screw terminal
- Protection: Built-in GDT Ceramic Discharge Tube, effectively release surge current
- Built-in EPCOS Common Mode Choke Coil, improve anti-parasitic feature
- Built-in power and signal isolation module, 2500V DC isolation, ±8KV electrostatic discharge
- Terminal Resistor: Each CAN channel has two built-in 120Ω terminal resistors that can be activated by a switch
- Baud Rate: 10Kbps~1Mbps
- Protocol Support: CAN2.0A, CAN2.0B, CANOpen, SAE J1939, DeviceNet, iCAN, ISO 15765 protocol
- Hardware Support: Single-wire CAN, High-speed CAN, Low-speed/Fault-tolerant CAN
- Transmission Speed: Receiving and sending for each CAN channel: 8500 frames/s
- Transmission Buffer: 2000-frame reception buffer and 1000-frame transmission buffer per channel (automatically retransmits on transmission failure)
- Indıcators red PWR indicator, lights up when USB connection is established and voltage is detected
- Green TXD indicator, lights up when data is sent from USB port
- Blue RXD indicator, lights up when device ports send back data
- Casing Material: Aluminum alloy case + flame retardant insulation panels on both sides
- Dimensions: 104 x 70 x 25 mm
- Operating Temperature: -40~85℃
- System Support Windows: Windows XP/7/8/10/11 (32/64 bit)
- Linux: Raspberry Pi OS, Ubuntu (Jetson Nano), VMware virtual PC, etc.
- For more information,visit the product manufacturer page..
- For programming and usage areas,click here.
Supports Protocol Conversion Between USB and CAN Data Bus
- Adopts High-Speed USB 2.0 Interface Compatible with USB 1.1 and USB 3.0
- Dual CAN Bus Interface Supports Bi-Directional Communication, Able to Work Independently Without Interference
EN − TL
