EN − TL
Account
Cart
Out Of Stock
Notify me when its in stockArducam PTZ camera is a complete solution to turn your Raspberry Pi/Jetson Nano/Xavier NX, and it is capable of remote directional and zoom control, so it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones. You can save a lot of cost and time in purchasing and deploying the camera. What’s more, this kit is based on the IR-CUT switchable 13MP camera to get sharp imaging all day and night.
Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted the camera into NVIDIA Jetson Orin kernel.
|
Image Sensor |
Sony IMX477 |
|
Optical Size |
1/4” |
|
Pixel Size |
1.55um x 1.55um |
|
Active Pixels |
12.3MP 4056(H)x3040(V) |
|
Frame Rates |
1080p30, 720p60 and 640 × 480p60/90 |
|
Frame Rates on Nvidia Jetson |
4032×3040@30fps, 3840×2160@30fps, 1920×1080@60fps (NVIDIA Orin NX/AGX NX): 4032x3040@60fps, 1920x1080@60fps |
|
Shutter Type |
Rolling Shutter |
|
Focal Length |
4.38-10.71mm±5% |
|
F.NO |
W:1.6-T:3.3±5% |
|
Focus Type |
Front group: focus Back group: Zoom |
|
Field of View(FOV) |
96° – 33° (Horizontal) |
|
IR Sensitivity |
Optional with additional Motorized IR-Cut filter |
|
Dimension |
36mm x 36mm |
|
Pan and Tilt Range |
0-180° |
|
Zoom Range (Wide => Tele) |
2317 steps 0.00396mm/step |
|
Focus Range(Near => Far) |
3009 steps 0.0047mm/step |
