Anycubic Green Resin 1 KG - SLA

LOW ODOR - Due to the widespread use of 3D printers in everyday life, the resin odor is kept to a minimum. Therefore, the Resin can be easily used in indoor conditions. It is recommended to operate with good ventilation, such as an open window.

EXCELLENT BUILD PLATE ADHESION - A special additive is incorporated into our Model Resin formulation to ensure the perfect adhesion of the printed model to the build plate. This results in strong adhesion to the build plate and fewer printing errors related to adhesion issues.

LOW SHRINKAGE - The formulation is designed to have a shrinkage percentage of less than 0.5%. This eliminates problems with printed models shrinking or cracking.

VIBRANT COLORS - Special pigments are designed to make the colors of printed models appear more vibrant and sharp.

NO SEDIMENTATION - The pigments used do not sediment, meaning they do not sink to the bottom of the resin.

HIGH RESOLUTION - Model Resin is designed to showcase the highest details of printed objects, making them easily and clearly observable.

HIGH SURFACE SMOOTHNESS - The use of Model Resin allows for achieving high surface smoothness.

NO COLOR SHIFTING - All colors are designed to have the same curing characteristics, allowing for consistent color settings.

EASY TO USE - Model Resin can be easily painted, reducing time spent on preparation before painting.

PAINTABLE - Model Resin can be used with any type of paint.

EASY CLEANUP - Clean with IPA or Ethanol. Soak in an alcohol bath and/or clean with a soft brush over the model to remove residual resin.

POST-CURE - Cure with 405nm UV LED lamps. It is recommended to use a UV 405nm LED lamp with 30W or more power, or expose it to direct sunlight until achieving non-stickiness.