1.5inch OLED Module

This is a 1.5" OLED Display Module, with 128x128 pixels, 16 gray scale and an embedded controller.

The module communicates via an SPI interface, making it great for a number of different development boards such as the Raspberry Pi.

Features

• 128x128 high resolution
• 16 gray scale - better display effect
• Supports SPI or I2C interface, configured via onboard resistor
• Comes with development resources and manual (examples for Raspberry Pi/Arduino)

Resources

Product Wiki

Package Contents

• 1x 1.5" OLED Module
• 1x PH2.0 7-pin

Specifications

• Driver: SSD1327
• Interface: SPI / I2C
• Display colour: White
• Gray scale: 16
• Resolution: 128x128 (most other competitive products are typically 128x64)
• Viewing angle: >160°
• Operating voltage: 3.3V / 5V
• Dimension: 44.5 x 37 (mm)

Interface

SYMBOL              DESCRIPTION

VCC                      Power (3.3~5V input)

GND                     Ground

DIN                      Data input

CLK                      Clock data input

CS                       Chip selection, low active

DC                       Data/Command select (high for data, low for command)

RST                     Reset, low active