Ürün Kod: MP00346
Ürünle İlgili Öne Çıkan Kampanyalar



  • Features
  • Payment Options
  • Comments (0)
  • GSM/GPRS/GNSS/Bluetooth HAT لوحة كرت سيم لراسبيري باي

    يمكن مع WaveShare GSM/GPRS/GNSS/Bluetooth HAT لوحة أن تقوم باستخدام Raspberry Pi بسهولة لعمل مكالمات هاتفية و إرسال رسائل SMS و الاتصال بالإنترنت و نقل البيانات عن طريق البلوتوث والكشف عن موقع راسبيري باي في أي مكان على الأرض. لوحة GSM/GPRS/GNSS/Bluetooth HAT صغيرة جداً لتناسب راسبيري باي الإصدار ZERO و ZERO W ويمكنها تحويل أي راسبيري باي إلى هاتف خلوي و ذلك باستخدام بطاقة سيم SIM عادية.

    المنتج لا يشمل راسبيري باي أو الإكسسوارات 

    خصائص لوحة WaveShare GSM/GPRS/GNSS/Bluetooth Hat

    • Raspberry Pi connectivity, compatible with Raspberry Pi 2B/3B/Zero/Zero W
    • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
    • Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning
    • Bluetooth 3.0, supports data transferring through Bluetooth
    • Onboard USB TO UART converter CP2102 for UART debugging
    • 6x LEDs for indicating the module working status
    • SIM card slot for 1.8V/3V SIM card
    • RTC with backup battery holder
    • Baudrate auto detection (1200bps ~115200bps)
    • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
    • Supports SIM application toolkit: GSM 11.14 Release 99
    • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)


    • Band
      • GSM 850/EGSM 900/DCS 1800/PCS 1900 MHz
      • Quad-band auto search
      • Compliant to GSM phase 2/2+
    • Emitting power
      • Class 4 (2W @ GSM 850/EGSM 900 MHz)
      • Class 1 (1W @ DCS 1800/PCS 1900 MHz)
    • GPRS connectivity
      • GPRS multi-slot class 12 (default)
      • GPRS multi-slot class 1~12 (configurable)
    • GPRS data feature
      • Downlink speed: max 85.6kbps
      • Uplink speed: max 85.6kbps
      • Coding schemes: CS-1\CS-2\CS-3\CS-4
      • Supports PAP (Password Authentication Protocol) for PPP connection
      • Supports PBCCH
      • Supports USSD
    • SMS
      • Supports: MT/MO/CB/Text/PDU mode
      • SMS storage: SIM card
    • Audio
      • Voice encode/decode mode: Half Rate\Full Rate\Enhanced Full Rate\Adaptive muti rate
      • Supports echo cancellation
      • Supports noise reduction


    • Receiver type
      • 33 tracking channels
      • 99 acquisition channels
      • GPS L1 C/A code
    • Sensitivity
      • Tracking: -165 dBm
      • Cold starts : -148 dBm
    • Time-To-First-Fix
      • Cold starts : 28s (typ.)
      • Hot starts : < 1s
      • Warm starts: 26s
    • Accuracy
      • Horizontal position : <2.5m CEP


    • Integrates AT commands
    • Compliant to Bluetooth specification3.0 + EDR
    • Supports SPP, OPP, HFP/HSP, etc.


    • Operating voltage: 5V
    • Operating temperature: -40°C ~ 85°C
    • Storage temperature: -45°C ~ 90°C
    • Dimensions: 30.2mm x 65mm

    WaveShare GSM/GPRS/GNSS/Bluetooth HAT On-Board Details

    • SIM868 module
    • ZMM5V1: regulator diode
    • SMF05C: TVS diode
    • CP2102: USB TO UART converter
    • MP1482: power chip
    • NDC7002N: voltage level translator
    • GPS status indicator
    • NET indicator:
      • flashes fast when the module starts up
      • flashes slowly after GSM register succeed
    • STA module working status indicator
    • SIM868 UART Tx/Rx indicator
    • Power indicator
    • SIM868 control button: press the button and hold for 1s, to startup/shutdown the SIM868
    • Raspberry Pi GPIO connector
    • SIM card slot
    • USB TO UART interface
    • 3.5mm earphone/mic jack
    • GNSS antenna connector
    • Bluetooth antenna connector
    • GSM antenna connector
    • RTC backup battery holder
    • UART selection switch
      • A: control the SIM868 through USB TO UART
      • B: control the SIM868 through Raspberry Pi
      • C: access Raspberry Pi through USB TO UART
    Weight (Kg)
Prepared by  T-Soft E-Commerce.