1
Bambu Lab A1 Mini Combo 3D Printer
0 Comments
15.110,00 ₺ + KDV
18.132,00 ₺
Share:
Free Shipping
1000 TL Above
5% Discount
All Products for Members Only!
Installment Options
Opportunities up to 12 Installments
A1 Serisi: A1 Mini Combo
Active Flow Rate Compensation: The Bambu Lab A1 Mini Combo 3D Printer revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure pressure in the nozzle. Our algorithm actively compensates the flow rate based on precise readings for extrusion.
Fully Automatic Calibration: The Bambu Lab A1 Mini Combo 3D Printer performs various calibrations automatically. It meticulously calibrates Z-offset, bed level, vibration resonance, and nozzle pressure automatically for every print job.
Plug and Play: The Bambu Lab A1 Mini Combo 3D Printer comes fully assembled and precisely calibrated. You can set up the device for the first print within just 20 minutes.
Active Motor Noise Reduction: The Bambu Lab A1 Mini Combo 3D Printer can calibrate parameters to match small individual differences between each drive motor. This compensates for the undesired harshness of motor noise.
CoreXY Speed and Quality Bed Suspension: It utilizes a sophisticated motion control system that incorporates fully metal rails, a rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and, most importantly, features that allow printing a quality bed in just 14 minutes and directly adheres to all speed bed rules without using special filaments.
Synchronization with Bambu Studio and Bambu Handy: Control and monitor your printer remotely through Bambu Studio or Bambu Handy. You can also record timelapse videos with the built-in camera.
Specifications:
Build Volume: 180x180x180 mm³
Frame: Steel
Hotend: Fully Metal
Extruder Gears: Steel
Nozzle: Stainless Steel
Maximum Hotend Temperature: 300 ℃
Nozzle Diameter (Included): 0.4 mm
Filament Cutter: Yes
Filament Diameter: 1.75 mm
Build Plate: Bamboo Textured PEI Plate
Maximum Build Plate Temperature: 80 ℃
Maximum Toolhead Speed: 500 mm/s
Maximum Toolhead Acceleration: 10m/s²
Control Board Fan: Closed Loop Control
Enclosure Temperature Regulator Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Supported Filaments: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA
Room Monitoring Camera: High-Speed Camera 1080P (Timelapse Supported)
Filament Sensor: Available
Filament Odometry: Available
Power Loss Recovery: Available
Product Size: 347x315x365 mm³
Net Weight 5.5 kg, Gross Weight (Including AMS) 10.2 kg
Package Size: 385x430x495 mm³
Electrical Requirements: 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350 W @110V
Package Contents:
1 x Bambu Lab A1 Mini Combo 3D Printer
Fully Automatic Calibration: The Bambu Lab A1 Mini Combo 3D Printer performs various calibrations automatically. It meticulously calibrates Z-offset, bed level, vibration resonance, and nozzle pressure automatically for every print job.
Plug and Play: The Bambu Lab A1 Mini Combo 3D Printer comes fully assembled and precisely calibrated. You can set up the device for the first print within just 20 minutes.
Active Motor Noise Reduction: The Bambu Lab A1 Mini Combo 3D Printer can calibrate parameters to match small individual differences between each drive motor. This compensates for the undesired harshness of motor noise.
CoreXY Speed and Quality Bed Suspension: It utilizes a sophisticated motion control system that incorporates fully metal rails, a rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and, most importantly, features that allow printing a quality bed in just 14 minutes and directly adheres to all speed bed rules without using special filaments.
Synchronization with Bambu Studio and Bambu Handy: Control and monitor your printer remotely through Bambu Studio or Bambu Handy. You can also record timelapse videos with the built-in camera.
Specifications:
Build Volume: 180x180x180 mm³
Frame: Steel
Hotend: Fully Metal
Extruder Gears: Steel
Nozzle: Stainless Steel
Maximum Hotend Temperature: 300 ℃
Nozzle Diameter (Included): 0.4 mm
Filament Cutter: Yes
Filament Diameter: 1.75 mm
Build Plate: Bamboo Textured PEI Plate
Maximum Build Plate Temperature: 80 ℃
Maximum Toolhead Speed: 500 mm/s
Maximum Toolhead Acceleration: 10m/s²
Control Board Fan: Closed Loop Control
Enclosure Temperature Regulator Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Supported Filaments: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA
Room Monitoring Camera: High-Speed Camera 1080P (Timelapse Supported)
Filament Sensor: Available
Filament Odometry: Available
Power Loss Recovery: Available
Product Size: 347x315x365 mm³
Net Weight 5.5 kg, Gross Weight (Including AMS) 10.2 kg
Package Size: 385x430x495 mm³
Electrical Requirements: 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350 W @110V
Package Contents:
1 x Bambu Lab A1 Mini Combo 3D Printer
Your Last Viewed