FT232 USB UART Card (Type A)

Product Features

• Built-in chip FT232RL.
• Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10.
• Can be powered by 5V output, 3.3V output, or from the target device.
• 3 LEDs: TXD LED, RXD LED, POWER LED.
• TXD, RXD, RTS#, CTS# are connected to the built-in soldered pins.

For more information, you can visit the manufacturer's product page.

How to Use ?

• VCCIO ↔ 3.3V veya 5V output (the module is powered from USB, and the built-in jumper should be shorted to either 3.3V or 5V).
• GND ↔ GND
• TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
• RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 << PC.RX)
• RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
• CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 << PC.CTS)