CP2102 USB UART Board (Type C)

This CP2102 USB Board is a handy UART accessory for communicating with devices, that features the single-chip USB to UART bridge CP2102 onboard.

This version of the module includes a USB-C connection and comes with pin headers and jumper wires. We also stock a Micro-USB version.

Note: the module is compatible with TTL level only, to avoid damage please do not directly connect to an RS232 circuit.

Features

• Single-Chip USB to UART Data Transfer
•  * No external resistors required, no external crystal required
•  * On-chip power-on reset circuit and voltage regulator
•  * Integrated 1024-Byte EEPROM
• USB Function Controller
•  * USB Specification 2.0 compliant; full-speed (12 Mbps)
•  * USB suspend states supported via SUSPEND pins
• UART
•  * All handshaking and modem interface signals
•  * Data formats supported:
•  * Data bits: 5, 6, 7, and 8
•  * Stop bits: 1, 1.5, and 2
•  * Parity: odd, even, no parity
•  * Baud rates: 300 bps to 1 Mbits
•  * 576 Byte receive buffer; 640 byte transmit buffer
•  * Hardware or X-On/X-Off handshaking supported
•  * Event character support
• Virtual COM Port Device Drivers
•   * Windows 8/7/Vista/Server 2003/XP/2000
•  * MAC OS-X/OS-9
•  * Linux 2.40 or higher
• USBXpress Direct Driver Support
•  * Windows 7/Vista/Server 2003/XP/2000
•  * Windows CE
• Temperature Range
•  * –40 to +85 °C

Package Contents

• 1x CP2102 USB UART Board (USB-C)
• 2x 4-pin male pin header
• 2x 4-pin female pin header
• 1x 6-pin custom connector jumper wire

Specifications

• Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/...
• Voltage output support: 5V or 3.3V
• Integrated USB protection device: SP0503
• 3 LEDs: TXD LED, RXD LED, POWER LED
• Pins accessible on pin headers: TXD, RXD, RTS, CTS
• Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)

Dimensions

• 46.99mm x 20.32mm