Arducam 12MP IMX477 Motor Focus High Quality Camera
Share:
1000 TL Above
All Products for Members Only!
Opportunities up to 12 Installments
This Arducam IMX477 High Quality motorized focus camera module integrates a motor that could be controlled by software for a smarter focus, and you will no longer focus the camera by screwing the lens with your bare hands. Instead, keyboard keys or OpenCV can be used to remotely control the focusing process of your HQ camera.
The same 12MP IMX477 High Quality Camera, but with smarter focus control – No more hand touching.
The intuitive focus control: Fine-tune the focus with keyboard arrow keys.
The automated focus control: Autofocus with OpenCV examples
Focus motor controlled via camera I2C.
Applications
- DSLR Camera Control
- Remote Viewing Camera
- Time-lapse Machine
- Security System
- Smart Video Doorbell
- Face Recognition
- Instant (Polaroid-Style) Camera, etc.
Specifications
|
Image Sensor |
Sony 12.3MP IMX477 |
|
Optical Size |
1/2.3″ (diagonal 7.857mm) |
|
Resolution |
12.3MP |
|
Active Pixels |
4056(H) x 3040(V) |
|
Pixel Size |
1.55um x 1.55um |
|
Frame Rates |
1080p@30fps, 720p@60fps and 640×480p@60/90fps |
|
Shutter Type |
Rolling Shutter |
|
Interface |
2-lane MIPI CSI-2 |
|
Default Lens Mount |
M12-Mount |
|
Lens Model NO. |
M23390H08 |
|
Focal Length |
3.9mm |
|
F.NO |
2.8 |
|
MOD |
0.3 |
|
Back Focal Length |
4.49mm |
|
Lens Dimension |
Φ14×18.67mm |
|
Focus Distance |
80mm to infinity |
|
Focus Type |
Manual Focus |
|
Field of View(FOV) |
75°(H) |
|
IR Sensitivity |
Integral 650nm IR fliter, visible light only |
|
Peaking Current |
300mA |
|
Camera Board Size |
38mm x 38mm |
|
Power requirement |
(with motorized motor): 3.3V/500mA max |
Package Including
- 1 × Arducam 12MP IMX477 Motorized Focus High Quality Camera for Raspberry Pi with lens
- 1 × 300mm 15pin-22pin flex ribbon cable for Raspberry Pi normal variants (Model As and Bs)
- 1 × 300mm 22pin-22pin flex ribbon cable for Raspberry Pi Zero and Compute Module
Note
- Raspberry Pi board is not included in the package
- It is not recommended to replace the default lens on the camera module, contact us first if needed
- This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, for the previous Raspberry Pi OS (Legacy) users, contact us at [email protected]
- Our IMX477 camera module support 4-lane in hardware, but the 4-lane camera driver requires extra customization. Here is why:
- Standard Raspberry Pi and Jetson Nano/Xavier NX can’t physically support a 4-lane connection (both of them only have 2-lane CSI connectors). Only the Raspberry Pi Compute Module and some 3rd party Jetson Carrier Boards come with 4-lane hardware support. Therefore, it’s not a general need.
- Extra works, specifically camera drivers, are required for a 4-lane connection other than the 4-lane physical connector. And the drivers are limited by the performances of the platform itself. For example, 4-lane can’t unlock 4k video on Raspberry Pi because the VideoCore does not currently support it. Jetson Nano is also to some extent limited because of the encoding capabilities. You need to make sure you really need it.
Documentation
Raspberry Pi Camera Autofocus: The Complete Guide
Quick Start Guide - 12MP IMX477 Motorized Focus Camera Module