28BYJ-48 Stepper Motor with ULN2003 driver card

The 28BYJ-48 stepper motor is a small, cheap, 5 volt geared stepping motor, perfect for Raspberry Pi robots. It can turn according to specific angles known as steps. It can rotate continuously like a regular DC, but the ability of doing step turns makes it more preferable for creating much more complex projects in robotics and with Raspberry Pi. It comes with a ULN2003 driver card, to be controlled more easily.

28BYJ-48 Stepper Motor Specifications

• Diameter: 28mm
• Voltage: 5V
• No-load pull into the frequency: >600Hz
• Phase: 4 - No-load pull-out frequency: >1000Hz
• Reduction ratio: 1/64 - Pull-in torque: >34.3mN.m (120Hz)
• Step Angle: 5.625 x 1/64
• Self-positioning torque: >34.3mN.m
• DCR: 200ohm +/- 7% (25'C) - Temperature: <40K (120Hz)
• Insulation resistance: >10Mohm (500V)
• Noise: <40dB (120Hz, No load, 10cm)
• Dielectric Strength: AC 600V / 1mA / 1s
• Insulation Class: A
• Cable length: 24cm
• Suitable for guide wind deflector, portable air conditioner valve, etc

ULN2003A Peripheral Driver and Actuator Specifications

• Lead out with connection pins
• convenient to use 
• Power supply: 5~12V
• Onboard 4-channel signal indicator light
• Onboard XH-5P connector, can connect to the 28BYJ-48 step motor directly
• PCB size: 40.5 x 21.3mm
• Application Onboard: XH-5P connector
• Can connect to the 28BYJ-48 step motor directly