Out of stock

28BYJ-48 Stepper Motor with ULN2003 driver card

Ürün Kod: MP00104
Çin

-

+

Share
Product Related Featured Campaigns

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Features
  • Payment Options
  • Comments (0)
  • The 28BYJ-48 stepper motor is a small, cheap, 5 volt geared stepping motor, perfect for Raspberry Pi robots. It can turn according to specific angles known as steps. It can rotate continuously like a regular DC, but the ability of doing step turns makes it more preferable for creating much more complex projects in robotics and with Raspberry Pi. It comes with a ULN2003 driver card, to be controlled more easily.

    28BYJ-48 Stepper Motor Specifications

    • Diameter: 28mm
    • Voltage: 5V
    • No-load pull into the frequency: >600Hz
    • Phase: 4 - No-load pull-out frequency: >1000Hz
    • Reduction ratio: 1/64 - Pull-in torque: >34.3mN.m (120Hz)
    • Step Angle: 5.625 x 1/64
    • Self-positioning torque: >34.3mN.m
    • DCR: 200ohm +/- 7% (25'C) - Temperature: <40K (120Hz)
    • Insulation resistance: >10Mohm (500V)
    • Noise: <40dB (120Hz, No load, 10cm)
    • Dielectric Strength: AC 600V / 1mA / 1s
    • Insulation Class: A
    • Cable length: 24cm
    • Suitable for guide wind deflector, portable air conditioner valve, etc

    ULN2003A Peripheral Driver and Actuator Specifications

    • Lead out with connection pins
    • convenient to use 
    • Power supply: 5~12V
    • Onboard 4-channel signal indicator light
    • Onboard XH-5P connector, can connect to the 28BYJ-48 step motor directly
    • PCB size: 40.5 x 21.3mm
    • Application Onboard: XH-5P connector
    • Can connect to the 28BYJ-48 step motor directly
Prepared by  T-Soft E-Commerce.