Menu
Account
Forgot password?
REGISTER
Cart

Adafruit Capacitive Touch Sensor Board - Momentary

Product Code : MP00168
Supplier Code: 1374
Stock:
287.21 TL + VAT
344.66 TL
EFT / Money Order Price : 334.32 TL %3  Discount

Out Of Stock

Notify me when its in stock
Add to List Comment Price Alert

This breakout board is the simplest way to create a project with a single ""momentary"" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor. 

This sensor is a momentary output type: When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights up and the output pin goes high; when the load is removed (e.g. the person removes their finger from the sensor-pad) the switch will turn off. You can also solder a wire to the middle pad and create your own capacitive pad if the built-in one isn't suited to your project. 

If you want to save power, the LED can be disconnected from the output pin (cut the trace between the jumper marked as such). We designed this breakout to have the more-responsive ""fast mode"" which draws about 0.5mA. If you need ultra-low (~50uA) power usage, the mode jumper can be cut on one side & soldered closed on the other to fix it into that mode. Check the datasheet for specific power usage measurements. 

Comes with a fully assembled board, and a small stick of 0.1"" header so you can solder and plug it into a breadboard. For additional contacts, we suggest using copper foil, then solder a wire that connects from the foil pad to the breakout. 

The Adafruit Capacitive Touch Sensor - (Momentary Switch) Features:

  • AT42QT1010 Chipset 
  • Standalone Board - No microcontroller required - just power with 1.8 to 5.5VDC and touch the pad to activate the sensor. 
  • Momentary Switch e.g. Contact will render the switch output 'on', removal of that contact will render the switch 'off'
  • Integrated LED to show on/off status of sensor
  • Board comes pre-assembled.
  • Includes a 6 Pin Stick of 0.1"" Header which can be soldered on for breadboarding.
  • Dimensions: 20mm / 0.8"" x 29.35mm / 1.15""
  • Weight: 2.03g
Weight(Kg)
0.5
5V Plus + Laser 650 nm 5mw
69.38 TL VAT
Add to Basket
NE555 Pulse Sensor
25.17 TL VAT
Add to Basket
ACS712 -30 +30A Current Sensor Carrier
48.41 TL VAT
Add to Basket
Voltage Sensor
14.52 TL VAT
Add to Basket
37-Piece Sensor Kit
516.34 TL VAT
Add to Basket
TTP223B Touch Sensor
11.00 TL VAT
Add to Basket
Metal Weight Sensor
24.20 TL VAT
Add to Basket
Circular Soft Potentiometer
645.43 TL VAT
Add to Basket
Prepared by  T-Soft E-Commerce.